WP6000 Series – MAC Filtering

WP6000 Series – MAC Filtering

1MAC filtering configuration page

MAC filtering allows network administrators to limit access to the network by enabling or not enabling specific MAC addresses.   The WP6000 series provide both a manual or automated method for enabling these features.

First, select the port to be configured and then manually enter the MAC address to be filtered.  Manually enter the VLAN ID and select Apply to enable the filter.

2MAC filtering automatic conversion page

MAC filtering can also be done automatically.  First, select the port from the dropdown box on the left.  Once selected, the display on the right will show all MAC Addresses on the network from that port.  Simply place a check in the box of the desired MAC Address needing to be filtered and click Apply.

To delete the filter, simply uncheck the box to the left of the MAC Address and click Apply.