ICX300-OAP Outdoor Bridge

ICX300 Outdoor Access Point

ICX300-OAP Outdoor Bridge/Access Point

 

The ICX300-OAP platform was designed to provide six times more bandwidth as it runs a Dual band 802.11a/b/g/n ecosystem.

Complimented by Gigabit ports, wireless network security, radio frequency control, and managed by the Link series Access Control System (ACS), the ICX300-OAP completes the icXchange® family of connectivity an communication solutions.

ICC’s software-driven AP’s are used either as stand-alone or as part of the Link series ACS to provide multiple secure access, authentication, and accounting mechanisms for various application environments.

Product Details

Easy to Deploy

Distributed Architecture

Advanced Features

RADIO

  • Dual Band Radio
    • 2X2 MIMO
    • 40 Mhz channel support
    • 80 Mhz channel support (802.11ac)
  • Meets international WiFi Standards and supports the most modern WiFi specifications.
    • 802.11 b/g/n
    • 802.11 a/n/ac
  • Supported WiFi channels 2.4Ghz
    • Channel 1-11
    • Channel 12-13
  • Channel 14 Supported WiFi channels 5Ghz Channels:
    • 36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,149,153,157,161
    • Wifi scanning to allow for best channel strength/ settings
  • MAC Filter
    • Allow all except listed MAC addresses
    • Allow only listed MAC addresses
    • Shows all clients connected to each radio (if more than one)
    • Sets the minimum connection/transmission rate a user can connect (Multicast Tx rate)
    • Ability to limit/exclude certain channels
    • Transmit power control to change the output of the radio
  • Multiple SSIDs
    • 16 SSID per band
    • 256 simulatneous users

RADIO MODES

  • AP Mode
  • Per SSID per VLAN
  • AP WDS Mode

AUTHENTICATION TYPES & SECURITY

  • Multiple authentication methods
    • WPA(PSK), WPA2(PSK), WEP WPA Enterprise, WPA2 Enterprise
  • Multiple encryption algorithms
    • CCMP (AES)
    • TKIP
    • CCMP and TKIP both
    • Hidden SSID support
    • Wireless client isolation
    • Remote Radius authentication and accounting support
    • Local authentication while utilizing other type of authentication (Mac passing)

USER INTERFACE

  • Easy access Web GUI
  • Multiple browser compatibility
    • Internet Explorer 11
    • Google Chrome
    • Mozilla Firefox
  • Multiple Admin login support
  • Admin access log

GRAPHS

  • Realtime Graphs
  • Realtime Load Graph
  • Realtime Traffic Graph
  • Realtime Wireless Graph
  • Realtime Active Connection Graph

ROUTES

  • ARP
  • Active IPv4-Routes

ADMINISTRATION

  • Setting of Router password
  • SSH
  • Telnet

FIREWALL

  • Firewall settings
  • General settings
  • Zones settings
  • Port Forwarding
  • Firewall Rules
  • Traffic Rules
  • Source NAT

BACKUP/UPGRADE FIRMWARE

  • Firmware Options
  • Backup/Restore firmware
  • Reset to defaults
  • Flash new firmware keeping previous configurations
  • Flash new firmware with factory settings
  • Configurable Option
  • Backup file list

WAN CONNECTIVITY MODES

  • DHCP
  • Static
  • PPTP
  • L2TP
  • PPPoE

LAN CONNECTIVITY MODES

  • DHCP Server
  • Configurable DHCP Lease Time
  • Configurable DHCP IP Pool
  • Static

NETWORKING

  • VLAN capability
    • Different IP for access point management vs end users
    • Static Routing
    • End user NAT’ing
    • SNMP capability for usage statistics and equipment health
    • WAN ping block
  • QoS / BANDWIDTH
    • Per user bandwidth capping: At a fixed capped rate per user, with respect to the total available up-link bandwidth
    • Per user bandwidth capping: At a fixed capped rate per user, irrespective of the total available up-link bandwidth
    • Per user bandwidth capping: At a variable cap based on the users on the network at any time, with respect to the total available up-link bandwidth
    • Queuing and Prioritization

CAPTIVE PORTAL

  • SSID Binding
  • Automatic redirection to Splash page
  • Customizable landing page
  • Custom DNS
  • NAS ID support
  • Whitelisted Websites
  • WISPr attributes
  • Various attributes support
  • Standard Radius
  • Access accept Bandwidth up and down
  • Data usage .
  • Session time out
  • Idle Timeout
  • Interim accounting updates
  • Disconnect message
  • Multiple RADIUS profiles support
  • Optional secondary RADIUS server and prioritization options

CLI

  • UCI based CLI

OPTIONS PRESENT ON WEB GUI

  • Status
  • Overview
  • Firewall Status
  • Routes
  • Realtime Graphs
  • System
    • System Properties
    • Time Synchronization
    • Administration
    • Software Backup/Upgrade Firmware Option
    • Reboot
  • Services
    • Hotspot Parameters
    • QoS
  • Network
    • Interfaces
    • Wifi
    • Switch
    • DHCP and DNS
    • WAN Ping Block
    • Hostnames
    • AP Mode
    • Static Routes
    • Firewall
  • Diagnostics
    • Ping
    • Trace route
    • NsLookup
Empty section. Edit page to add content here.
Icon

ICX300-OAP Outdoor AP Datasheet 79.51 KB

Icon

Outdoor AP Installation Guide 374.42 KB