ICX10UAD – 802.11AC Indoor Managed Access Point

Dual-Radio 802.11ac Access Point

ICX10UAD Access Point

The ICC ICX10UAD is a multi-mode access device designed to be a cost-effective dual-radio access point with optional routing capability.  This UAD AP features two streams and 802.11ac technology for 867Mbps performance for 5Ghz devices and 300 Mbps for 802.11n clients.

ICC’s Intelligent Content Control for SMB networks ensure simple connectivity, identification of content, content control to ensure  delivery for an enhanced user experience even while the network becomes more saturated.  Policy-based and Software-driven features allow for specific Quality-of-Service streams that ensure Voice, Video, and Data services based on client or provider requirements.  Combined with basic Firewall setting, these devices enable users to start deploying true all-wireless network environments at superior value.

Unified Access Device (UAD) series of all wireless indoor and outdoor networking platforms, fits the needs of expanding mobility networks seeking greater IP data control of content, security, and flexibility.  Designed as one of the only semi-open wireless platforms, UADs can be traditionally managed by SNMP or by a service provider’s system. As providers deliver more services, ICC Networking enables them to access a great amount of our platforms for integration into their service systems. This allows for greater integration, control and service options by mobility providers.

Product Details

Standalone or Cloud-Centric

Intelligent Features

Superior Value

RADIO

  • Dual Band Radio
    • 2X2 MIMO
    • 40 Mhz channel support
    • 80 Mhz channel support (802.11ac)
  • Meets international WiFi Standards and supports the most modern WiFi specifications.
    • 802.11 b/g/n
    • 802.11 a/n/ac
  • Supported WiFi channels 2.4Ghz
    • Channel 1-11
    • Channel 12-13
  • Channel 14 Supported WiFi channels 5Ghz Channels:
    • 36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,149,153,157,161
    • Wifi scanning to allow for best channel strength/ settings
  • MAC Filter
    • Allow all except listed MAC addresses
    • Allow only listed MAC addresses
    • Shows all clients connected to each radio (if more than one)
    • Sets the minimum connection/transmission rate a user can connect (Multicast Tx rate)
    • Ability to limit/exclude certain channels
    • Transmit power control to change the output of the radio
  • Multiple SSIDs
    • 16 SSID per band
    • 256 simulatneous users

RADIO MODES

  • AP Mode
  • Per SSID per VLAN
  • AP WDS Mode

AUTHENTICATION TYPES & SECURITY

  • Multiple authentication methods
    • WPA(PSK), WPA2(PSK), WEP WPA Enterprise, WPA2 Enterprise
  • Multiple encryption algorithms
    • CCMP (AES)
    • TKIP
    • CCMP and TKIP both
    • Hidden SSID support
    • Wireless client isolation
    • Remote Radius authentication and accounting support
    • Local authentication while utilizing other type of authentication (Mac passing)

USER INTERFACE

  • Easy access Web GUI
  • Multiple browser compatibility
    • Internet Explorer 11
    • Google Chrome
    • Mozilla Firefox
  • Multiple Admin login support
  • Admin access log

GRAPHS

  • Realtime Graphs
  • Realtime Load Graph
  • Realtime Traffic Graph
  • Realtime Wireless Graph
  • Realtime Active Connection Graph

ROUTES

  • ARP
  • Active IPv4-Routes

ADMINISTRATION

  • Setting of Router password
  • SSH
  • Telnet

FIREWALL

  • Firewall settings
  • General settings
  • Zones settings
  • Port Forwarding
  • Firewall Rules
  • Traffic Rules
  • Source NAT

BACKUP/UPGRADE FIRMWARE

  • Firmware Options
  • Backup/Restore firmware
  • Reset to defaults
  • Flash new firmware keeping previous configurations
  • Flash new firmware with factory settings
  • Configurable Option
  • Backup file list

WAN CONNECTIVITY MODES

  • DHCP
  • Static
  • PPTP
  • L2TP
  • PPPoE

LAN CONNECTIVITY MODES

  • DHCP Server
  • Configurable DHCP Lease Time
  • Configurable DHCP IP Pool
  • Static

NETWORKING

  • VLAN capability
    • Different IP for access point management vs end users
    • Static Routing
    • End user NAT’ing
    • SNMP capability for usage statistics and equipment health
    • WAN ping block
  • QoS / BANDWIDTH
    • Per user bandwidth capping: At a fixed capped rate per user, with respect to the total available up-link bandwidth
    • Per user bandwidth capping: At a fixed capped rate per user, irrespective of the total available up-link bandwidth
    • Per user bandwidth capping: At a variable cap based on the users on the network at any time, with respect to the total available up-link bandwidth
    • Queuing and Prioritization

CAPTIVE PORTAL

  • SSID Binding
  • Automatic redirection to Splash page
  • Customizable landing page
  • Custom DNS
  • NAS ID support
  • Whitelisted Websites
  • WISPr attributes
  • Various attributes support
  • Standard Radius
  • Access accept Bandwidth up and down
  • Data usage .
  • Session time out
  • Idle Timeout
  • Interim accounting updates
  • Disconnect message
  • Multiple RADIUS profiles support
  • Optional secondary RADIUS server and prioritization options

CLI

  • UCI based CLI

OPTIONS PRESENT ON WEB GUI

  • Status
  • Overview
  • Firewall Status
  • Routes
  • Realtime Graphs
  • System
    • System Properties
    • Time Synchronization
    • Administration
    • Software Backup/Upgrade Firmware Option
    • Reboot
  • Services
    • Hotspot Parameters
    • QoS
  • Network
    • Interfaces
    • Wifi
    • Switch
    • DHCP and DNS
    • WAN Ping Block
    • Hostnames
    • AP Mode
    • Static Routes
    • Firewall
  • Diagnostics
    • Ping
    • Trace route
    • NsLookup

Description: 11ac 2×2 managed wireless access point

Dimensions: 6.2 x 6.2 x 1.6

10/100/1000Base-T Port: 1

Console Port: 1

USB 2.0 Port: 1

PoE: 802.3af

Local Power: 12V DC 1A

Maximum Power Consumption: <12W

RF Port: Internal 3+ dBi on 2.4 GHz and 5 GHz each

Transmit Power: The maximum transmit power output on each RF band is 23 dBm for all rate levels and modulation modes.

Power Adjustment Granularity: 1 dBm

Working Frequency Band: 802.11b/g/n : 2.4 GHz to 2.483 GHz802.11a/n : 5.150 GHz to 5.850 GHz802.11ac:5.150GHz to 5.250GHz
5.250GHz to 5.350GHz
5.725GHz to 5.850GHz

Modulation Technology:  802.11b:BPSK,QPSK,CCK802.11a/g/n:BPSK,QPSK,16-QAM,64-QAM802.11ac:BPSK,QPSK,16-QAM,64-QAM,256-QAM

Working/Storage Temperature: -5°C to +45°C -40°C~85°C

Working/Storage RH: 5% to 95% (non-condensing)

Protection Level: IP30

Radios: 2

Band: Dual concurrent

Wi-Fi Standards: 802.11a/b/g/n/ac

MIMO Type: 2×2:2

BSSID (per radio): 32

Supported Clients: 255

RF Connectors: No

External Antennas: No

Jumbo Frame Support: Yes

USB Connection: 1

Console Port: Yes

POE Passthrough: No

Ships with AC/DC Power Supply: No

Lifetime Warranty: Yes

Icon

Unified Access Device Configuration Manual 3.84 MB

Icon

ICX10UAD Quick Install Guide 2.97 MB

Icon

ICX10UAD Datasheet 160.75 KB

    Icon

    ICX10UAD Firmware 12.3 MB

      We work closely with you to find the simple solution.