ICX400GAP Series

ICX400GAP High Performance MIMO Access Points

ICX400 Series Access Point


The ICC ICX400 Series, made up of the ICX400GAP 2×2 MIMO, and ICX420GAP 3×3 MIMO 802.11ac high performance access points, not only ensure advanced 600Mbps 11n and 1.3Gbps on 11a, but also use advanced features to ensure content is secure, routed, and delivered due to the additional levels of efficiency derived within the icXchange ecosystem.


Wireless mobility users continue to demonstrate that there’s little limit to their appetite for being and staying connected everywhere. Connectivity is no longer an option, but is mandatory and remains part of the decision of the customer when looking for hotels, coffee shops, neighborhoods, and any other place where we spent any amount of time. This explosion in device use also raises issues of security, bandwidth quality, content delivery, and other potential performance issues. The ICX400 series APs resolve these issues either as a stand-alone AP or as part of the much larger and intelligent Link series ACS platform. At ICC, we address these concerns with software-driven systems combined with advanced hardware platforms designed to be flexible to match the needs of any user.

Product Details

High Performance

Intelligent Traffic Management

High-Speed, High-Performance


  • Dual Band Radio
    • 2X2 MIMO
    • 40 Mhz channel support
    • 80 Mhz channel support (802.11ac)
  • Meets international WiFi Standards and supports the most modern WiFi specifications.
    • 802.11 b/g/n
    • 802.11 a/n/ac
  • Supported WiFi channels 2.4Ghz
    • Channel 1-11
    • Channel 12-13
    • Channel 14
  • Supported WiFi channels 5Ghz Channels:
    • 36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,149,153,157,161
    • Wi-Fi scanning to allow for best channel strength/settings
  • MAC Filter
    • Allow all except listed MAC addresses
    • Allow only listed MAC addresses
    • Shows all clients connected to each radio (if more than one)
    • Sets the minimum connection/transmission rate a user can connect (Multicast Tx rate)
    • Ability to limit/exclude certain channels
    • Transmit power control to change the output of the radio
  • Multiple SSIDs
    • 16 SSID per band
    • 256 simultaneous users


  • AP Mode
  • Per SSID per VLAN
  • AP WDS Mode
  • AP Bridge Mode


  • Multiple authentication methods
    • WPA(PSK), WPA2(PSK), WEP WPA Enterprise, WPA2 Enterprise
  • Multiple encryption algorithms
    • CCMP (AES)
    • TKIP
    • CCMP and TKIP both
    • Hidden SSID support
    • Wireless client isolation
    • Remote Radius authentication and accounting support
    • Local authentication while utilizing other type of authentication (Mac passing)


  • Easy access Web GUI
  • Multiple browser compatibility
    • Internet Explorer 11
    • Google Chrome
    • Mozilla Firefox
  • Multiple Admin login support
  • Admin access log


  • Realtime Graphs
  • Realtime Load Graph
  • Realtime Traffic Graph
  • Realtime Wireless Graph
  • Realtime Active Connection Graph


  • ARP
  • Active IPv4-Routes


  • Setting of Router password
  • SSH
  • Telnet


  • Firewall settings
  • General settings
  • Zones settings
  • Port Forwarding
  • Firewall Rules
  • Traffic Rules
  • Source NAT


  • Firmware Options
  • Backup/Restore firmware
  • Reset to defaults
  • Flash new firmware keeping previous configurations
  • Flash new firmware with factory settings
  • Configurable Option
  • Backup file list


  • DHCP
  • Static
  • PPTP
  • L2TP
  • PPPoE


  • DHCP Server
  • Configurable DHCP Lease Time
  • Configurable DHCP IP Pool
  • Static


  • VLAN capability
    • Different IP for access point management vs end users
    • Static Routing
    • End user NAT’ing
    • SNMP capability for usage statistics and equipment health
    • WAN ping block
    • Per user bandwidth capping: At a fixed capped rate per user, with respect to the total available up-link bandwidth
    • Per user bandwidth capping: At a fixed capped rate per user, irrespective of the total available up-link bandwidth
    • Per user bandwidth capping: At a variable cap based on the users on the network at any time, with respect to the total available up-link bandwidth
    • Queuing and Prioritization


  • SSID Binding
  • Automatic redirection to Splash page
  • Customizable landing page
  • Custom DNS
  • NAS ID support
  • Whitelisted Websites
  • WISPr attributes
  • Various attributes support
  • Standard Radius
  • Access accept Bandwidth up and down
  • Data usage .
  • Session time out
  • Idle Timeout
  • Interim accounting updates
  • Disconnect message
  • Multiple RADIUS profiles support
  • Optional secondary RADIUS server and prioritization options


  • UCI based CLI


  • Wi-Fi
  • Ethernet Switch
  • DHCP and DNS
  • WAN Ping Block
  • Hostnames
  • AP Mode
  • Static Routes
  • Firewall


  • Ping
  • Trace route
  • NsLookup


  • Status
  • Overview
  • Firewall Status
  • Routes
  • Realtime Graphs
  • System
    • System Properties
    • Time Synchronization
    • Administration
    • Software Backup/Upgrade Firmware Option
    • Reboot
  • Services
    • Hotspot Parameters
    • QoS
  • Network
    • Interfaces
    • Wifi
    • Switch
    • DHCP and DNS
    • WAN Ping Block
    • Hostnames
    • AP Mode
    • Static Routes
    • Firewall
  • Diagnostics
    • Ping
    • Trace route
    • NsLookup

Description: 2×2 MIMO 802.11ac, 3×3 MIMO 802.11ac

Dimensions:  200 x 170 x 40 (mm) 7.8 x 6.7 x 1.6 (in)

10/100/1000Base-T Port: 2

Console Port: 1

USB 2.0 Port: 1

PoE: 802.3af /802.3at

Local Power: External power adapter Input: 100~240V AC , Output: 12 V DC

Maximum Power Consumption: <13W(no USB)

Memory: 256MB DDR3, 32MB Flash

RF Port: Built-in 2.4 GHz 4 dBi antenna and 5 GHz 5 dBi antenna Built-in 2.4 GHz 4 dBi antenna and 5 GHz 5 dBi antenna

Transmit Power: The maximum transmit power output on each RF band is 20 dBm for all rate levels and modulation modes.

Power Adjustment Granularity: 1 dBm

Working Frequency Band: 802.11a/n: 5.150 GHz to 5.850 GHz 802.11b/g/n: 2.4 GHz to 2.483 GHz 802.11ac: 5.150GHz to 5.250GHz 5.250GHz to 5.350GHz 5.725GHz to 5.850GHz

Modulation Technology: 802.11b,BPSK,QPSK,CCK 802.11a/g/n:BPSK,QPSK,16- QAM,64-QAM 802.11ac,BPSK,QPSK,16-QAM,64- QAM,256-QAM

Virtual AP (BSSID): 32

Number of Spatial Streams:  ICX400GAP – 2, ICX320GAP  – 3

Working/Storage Temperature: –0°C to + 50°C 32°F to + 122°F / –40°C to + 70°C -40°F to + 158°F

Working/Storage RH: 5% to 95% (non-condensing)

NEMA Enclosure: IP31

Radios: 2


Wi-Fi Standards: 

MIMO Type: 2×2, 3×3

Supported Clients: 

RF Connectors: 

External Antennas: 

Jumbo Frame Support: 

USB Connection: 1

Console Port: 

POE Passthrough:

Ships with AC/DC Power Supply:

Lifetime Warranty: Yes


ICX400GAP Series Quick Installation Guide 1.25 MB


ICX400GAP Datasheet 222.43 KB


ICX400GAP/ICX420GAP User Manual 5.10 MB


    ICX420GAP Firmware 11.57 MB


    ICX400GAP Firmware 11.32 MB

      We work closely with you to find the simple solution.