ICX200WAP High Performance Access Point

Standalone or Cloud Access Point with 2x2 MIMO, 802.1 Access Point

ICX200WAP Access Point

The ICC ICX200WAP is a Single Band 300Mbps intelligent power Access Points designed to meet the requirements of today’s most demanding SMB networks. The ICX200WAP is the starting point that serves as the gateway into the full breadth of Unified Access Controller based Access Points in the ICC portfolio. Designed for performance with 48 dBm/500mW transmit power, the ICX200WAP is a multi-purpose device that can be a standalone AP or as part of a larger of the software-driven ICC Link Series controllers.

 

ICC’s Intelligent Content Control for SMB networks ensure simple connectivity, identification of content, content control to ensure delivery for an enhanced user experience even while the network becomes more saturated. The ICX200WAP helps clients deliver performance and service levels, reducing overall cost to the SMB.

Standalone

The ICX200WAP is designed to ensure content can efficiently pass from user to network and back. Part of ICC’s design was to build the solution with dual output power amplifiers (unlike most high powered devices) which ensure a smooth signal propagation in all directions. This allows for better transmission of such data as HD Video, Voice, and other critical content.

Combined with a 2×2 MIMO architecture, the ICX200WAP’s higher power output ensures extended range and coverage for any wireless network deployment. BYOD applications are particularly important when using the ICX200WAP as it helps smart phones, laptops, and tablets the maximum Wi-Fi® speed and distance.

Controller-Based

ICX200WAP expands content control, security, performance, and cost-effectiveness when added to an ICC Link Series Controller. The Link series ACS will provide multiple secure access, authentication, and accounting mechanisms for various
application environments. These include:

  • 802.1x authentication
  • Captive portal authentication, including built-in portal, external portal, and custom portal authentication modes
  • MAC address authentication
  • LDAP authentication
  • WAPI encryption and authentication
  • Wired/wireless integrated authentication and accounting

Product Details

Ideal for last mile, stadium, city or other high-density ecosystem

Standalone or Cloud-Centric

High Power Output

Wireless Features

  • Dynamic channel adjustment (DCA)
  • Transmit power control (TPC)
  • Blind area detection and repair
  • Hidden SSID
  • RTS/CTS
  • RF environment scanning
  • Dynamically shift users for best performance
  • Link integrity maintenance
  • Monitor and transition low performance devices to higher signal performance areas
  • Forced roaming of terminals with weak signals
  • High-density application optimization

802.11N

  • 40 MHz bundling
  • 300 Mbps (PHY)
  • Frame aggregation (A-MPDU)
  • Maximum likelihood demodulation (MLD)
  • Transmit beam forming (TxBF)
  • Maximum ratio combining (MRC)
  • Space-time block coding (STBC)
  • Low-density parity-check code (LDPC)

SECURITY

  • Encryption
  • 802.11i
  • WAPI
  • MAC address authentication
  • LDAP authentication
  • PEAP authentication
  • WIDS/WIPS
  • Real-time spectrum protection
  • Protection against DoS attacks
  • Forwarding security
  • User isolation
  • Periodic SSID enabling and disabling
  • Access control of free resources
  • Secure admission control of wireless terminals
  • Wireless SAVI
  • ACL
  • Secure access control of APs

FORWARDING

  • IP address setting
  • IPv6 forwarding
  • IPv6 portal
  • Local forwarding
  • Multicast
  • Roaming
  • AP switching reference
  • WDS

QUALITY-OF-SERVICE (QoS)

  • WMM
  • Priority mapping
  • QoS policy mapping
  • L2-L4 packet filtering and flow classification
  • Load balancing
  • Bandwidth limit
  • Call admission control (CAC)
  • Power saving mode
  • Intelligent identification of terminals
  • Wireless network VAS
  • Multicast enhancement

MANAGEMENT

  • Network management
  • Maintenance mode
  • Log function
  • Alarm
  • Fault detection
  • Remote probe analysis
  • Dual-image (dual-OS) backup mechanism
  • Watchdog

Description: 11n 2×2 single band access point

Dimensions: 7.7 x 7.7 x 1.8

10/100Base-T Port: 1

PoE: 802.3af /802.3at

Local Power: External power adapter Input:100~240V AC, Output: 12V DC

Maximum Power Consumption: 8W

RF Port: Built-in 2.4 GHz 3.5dBi antenna

Transmit Power: The maximum transmit power output on each antenna port is 24 dBm for all rate levels and modulation modes.

Power Adjustment Granularity: 1 dBm

Working Frequency Band: 802.11b/g/n : 2.4 GHz to 2.483 GHz

Modulation Technology: OFDM:BPSK@6/9Mbps, QPSK@12/18Mbps,
16-QAM@24Mbps, 64-QAM@48/54Mbps
DSSS:DBPSK@1Mbps, DQPSK@2Mbps,
CCK@5.5/11Mbps MIMO-OFDM:MCS 0-15

Working/Storage Temperature: 0°C 50°C / -40°C-85°C

Working/Storage RH: 0% ~100% (no condensing)

Protection Level: IP21

Radios: 1

Band: Single

Wi-Fi Standards: 802.11a/b/g/n

MIMO Type: 2×2:1

BSSID (per radio): 16

Supported Clients: 150

RF Connectors: No

External Antennas: No

Jumbo Frame Support: No

USB Connection: No

Console Port: No

POE Passthrough: No

Ships with AC/DC Power Supply: No

Lifetime Warranty: Yes

Icon

ICX200WAP Quick Installation Guide 1.20 MB

Icon

ICX200WAP Datasheet 89.95 KB

Icon

ICX200WAP Web User Manual 1.11 MB

    Icon

    ICX200WAP Firmware 12.23 MB

      We work closely with you to find the simple solution.